Hoover HTPS64SCTTWIFI Instruction Manual page 15

Power management Rules
If total power exceeds the limitation of 2.5kw, 3.0kw, 4.5kw, 6.5kw (depending
on which level you've set), you are not able to increase power stage of any zone.
If you increase it by touching '+', the cooktop will beep 3 times and indicator will
show a flashing 'Pn'. Thus you need to decrease power stage of other zones before
increasing the power of objective zone.
My Chef
First, download the hOn App and install to your portable device. Then enroll your
induction hob.
Switch on the hob, touch the WiFi button and hold for 3 seconds, the hob will
display 'rr', and the WiFi indicator light will flash, then you can start the enrollment.
Once the WIFI module connects the router successfully, the WiFi indicator light
will be on all the time. Otherwise the WiFi indicator light will keep flashing.
How to set
Set the my chef procedure on hOn App, and send the command to the hob, you will
hear two beeps and the dot of the timer display will flash. Then touch the my
chef button, you will hear one beep and the dot of the timer display will be fixed.
The hob will work following the setting on App and the selected zones will show
"A.". On the App you will have access to 50 assisted cooking recipes, together
with some special functions: Keep warm, Melting, Boiling, Simmering and Frying.
Attention:
There is a special case. If all the zone indicator lights went out when you've set
cooking recipes on App, you'll need to touch On/off button before touching my
chef button. Once all indicator lights went out, within 10 minutes you need to
finish the cooking recipe setting. Otherwise you will need to connect the router
and set the recipe again.
EN-14