Picture - Loewe Connect ID 55 User Manual

Connect ID 40-55
User guide
System settings

Picture

Picture
Here you do the settings referring to the representation of the picture
signal on your TV set.
Calling picture settings
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Picture,
go to next column.
Picture 3D
Picture ad-
justment
Contrast
Brightness
Colour in-
ten
Image+
Active
Picture for-
mat
more ...
Select desired picture function,
proceed to next column.
Explanations of the picture settings:
3D Do the settings for your TV set's 3D display.
Picture You can switch between three preset picture settings
adjustment and the three personal picture values that you have
adjusted.
Contrast The contrast setting depends on the brightness of
the room. The brighter the surroundings the higher
the contrast should be set.
The power consumption of the TV set depends
directly on the value set here.
Brightness Set the brightness so that the black areas of the
picture only just appear black.
Colour Set the colour intensity to suit your personal taste.
intensity
Image +
Picture enhancement on/off.
Active
Picture Set picture format.
format
more ... call with OK (see right-hand column).
80
If your desired display format has not been automatically
selected then you can choose it in the 3D settings menu.
You may display the 3D image in 2D or vice versavice versa.
Explanations of the picture settings (continuation):
Colour Here, you can give the TV picture a warmer or colder
temperature hue according to your personal taste.
Sharpness Here you can adjust picture sharpness to obtain the
best definition.
Move picture When using the TV aspect ratios Panorama or Zoom,
up/down the text or graphic displays at the top and bottom are
not or only partially visible. You can move the picture
up or down with the up/down menu control keys to
make the displays visible.
Auto depending on video (VBD+):
dimming The background lighting is reduced depending on
the current video content and the video signal is
simultaneously amplified in order to get an improved
contrast of your TV picture.
depending on the environment (OPC):
The contrast of your TV picture is automatically
reduced vs. decreasing room brightness (Optical
Power Control – OPC).
The automatic dimming also results in a lower
power consumption of the TV set.
Due to a reduction in the luminance in 3D mode
for technical reasons, this function is deactivated
when showing 3D content.
Film quality DMM reduces jolt in rapid picture object movements
improvement and rolling text displays. This applies especially for
(DMM) movies.
Digital Noise With active DNC (Digital Noise Control) you can
Control (DNC) eliminate or reduce picture noise.
Skin tone Adjust the skin tone so that the most natural facial
skin colour is achieved.
Deblocking To minimise the visible interference to the picture
filter caused by modern compression methods for images
and image sequences (formation of small blocks),
a so-called deblocking filter can be activated which
counteracts this interference.
PC IN For some PC image formats, horizontal as well as
display vertical position and the phase position of the image
can be corrected.