Table of Contents
Advertisement
Ambient Temperature
Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be
adversely affected.
Do not store the refrigerator in Direct Sunlight
or sheltered outdoor areas.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2.8 inches (7 cm) between the back of the
refrigerator and the wall.
24" (61 cm)
Removing/Assembling the
Refrigerator Door Handles
Removing the Handles
1
2
2.8" (7 cm)
Assembling the Handles
1
2
NOTE
Removing the doors is always
recommended when it is necessary to
move the refrigerator through a narrow
opening. If it is necessary to remove the
handles, follow the directions below.
Loosen the set screws
Allen wrench and remove the handle.
Only if required, loosen the mounting
fasteners
that connect to the refrigerator
door and handle using a
wrench, remove the mounting fasteners.
If already removed, assemble the
mounting fasteners
1
handle using a
/
in. Allen wrench.
4
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
3
with a
/
in. Allen wrench.
32
INSTALLATION
11
3
with a
/
in.
32
1
/
in. Allen
4
at both ends of the
Advertisement
Table of Contents
