Related Manuals for N-BIOTEK NB-204MR
Summary of Contents for N-BIOTEK NB-204MR
- Page 1 OPERATING MANUAL MINI ROLLER < NB-204MR > * Design is subject to change without prior notice for improvement of performance.
-
Page 2: Table Of Contents
CONTENTS SAFETY AND GENERAL PRECAUTION ........................2 FEATURES ..................................5 SPECIFICATION ................................5 CONFIGURATION ...............................6 CONTROL PANEL ...............................7 OPERATION ................................8 WARRANTY ................................9... -
Page 3: Safety And General Precaution
SAFETY AND GENERAL PRECAUTION ■ Precaution is the subject to follow without fail, which is to prevent the possible accident or danger. ■ Precaution is separated into ‘Warning’ and ‘Caution’. Each of them has following meaning. ■ Other Signs 1. PRECAUTION FOR ELECTRICITY WARNING Use this product only internally. - Page 4 2. PRECAUTION FOR INSTALLATION WARNING Use it with the proper voltage. Please check the voltage & Hertz written on serial label. (Over-voltage, low-voltage can damage the product and poor performance.) Do not install at a humid place. (It causes an electric leakage accident and a corrosive of the product.) Keep this product out of the direct ray of sun and do not install at a hot place or a place that is near an electric heat or ducts, cooling source.
- Page 5 4. PRECAUTION FOR GROUND CONNECTION WARNING Please ground before use the product, if you don't ground, you can be electrically shocked when malfunction or an electric leakage occurs At the place where you can't ground, * Please buy the equipment to prevent elect leakage. * An electric shock, an electric leakage and a fire can be occurred without an electric leakage breaker.
-
Page 6: Features
Remote control box to control roller outside incubator when using it in an incubator ■ Oil Lubricants free system for maintenance free SPECIFICATION Items Unit NB-204MR Speed Variable 1 to 30 Range *RPM is based on the rotation speed of roller shaft, not the rotation of bottle. -
Page 7: Configuration
<Front View> CONFIGURATION <Back View> <Control Box > Classification Name Classification Name Roller Frame Belt Pully (Acetal) Roller Shaft DC Motor Control Box Hand Grip to hold Power Cable Connector(L-1 from roller body) Back Cover AC Inlet and Power Switch Belt Pully (Aluminum) Fuse Box(Fuse is Inserted) Urethane Belt (round type) -
Page 8: Control Panel
<Example View – How to Use Roller in an Incubator> Attachment with Magnetic foot Thin flat roller connecting cable Ensure to place it on flat surface CONTROL PANEL Classification Description RPM/TIME Display Displays present RPM or TIME RPM ↔ TIME Mode switching button RPM/TIME Button SET Button To set RPM or TIME... -
Page 9: Operation
OPERATION ➢ Locating the roller and the control box ✓ Before connecting the power cable, place the roller and control box at desired place. ✓ In case that roller is used in an Incubator or chamber, be sure to enough clearance in the space for the use of roller. -
Page 10: Warranty
N-BIOTEK, whichever is sooner as indicated in above table. This period is proved by serial no. 3. N-BIOTEK will not be responsible of free warranty service for the faulty caused by user’s improper operation, excessive use, use of incorrect voltage & frequency, storage in wrong environment mentioned in Manual.