Obtaining Physical Device Information - HighPoint RocketStor 6618A User Manual

Obtaining Physical Device Information

1. Log into the WebGUI
2. Click Physical
3. Click Devices located on the left panel
The following properties are part of the Physical Devices Information box under the
physical tab.
 Model – Model number of the physical drive
 Capacity – Total capacity of the physical drive

Revision – HDD device firmware revision number

Read Ahead* - (Enable/Disable) Disk read ahead.
 Location – Device location (example: 1/2 states controller 1, channel 2)

Write Cache* – (Enable/Disable) the disk write cache

Max Free – space on the disk that is not configured in an array

Status – (Normal, disabled, critical) status of the disk
 NCQ* – (Enable/Disable) Native Command Queuing

Serial Number – serial number of the physical disk

Identify LED* – On/Off – toggle the IDENTIFY (RED) on the front panel
Note: this is not supported by the RocketStor6618A
28