Rear Loading Boot Drive Carrier LEDs
At the bottom of the boot drive carrier, the left LED shows Power, and is Blue when power is on;
the right LED shows Activity, and flashes green when there is activity.
10 GbE NIC Card LEDs
Each SFP connector on the four-port NIC card has two LEDs. The Upper LED indicates link
speed (Blue = 10G link, Yellow = 1G link), and the bottom LED indicates Link/Activity (Link =
green, Activity = flashing green).
Onboard 1 GbE NIC LEDs
Each of the two RJ45 1 GbE connectors on the back panel has two built-in LEDs. The left LED
indicates Link/Activity (Link = green, Activity = flashing green), and the right LED indicates
Link Speed (Amber = 1 Gb/s, Green = 100 Mb/s, and Off = 10 Mb/s).
Chapter 4. Appliance physical interface
13