Saving The Parameterisation Data - Siemens SITRANS LG260 Operating Instructions Manual

Factory calibration date
Device ID
Sensor characteristics
On paper
In the display and adjust-
ment module
PBD-51041061
In this menu item, the date of factory calibration of the sensor as well
as the date of the last change of sensor parameters are displayed via
the display and adjustment module or via the PC.
In this menu item, the identification number of the instrument in a
Foundation Fieldbus system is shown.
In this menu item, the features of the sensor such as approval, pro-
cess fitting, seal, measuring range, electronics, housing and others
are displayed.
Example for displayed sensor features.
6.5

Saving the parameterisation data

We recommended writing down the adjustment data, e.g. in this op-
erating instructions manual, and archiving them afterwards. They are
thus available for multiple use or service purposes.
If the instrument is equipped with a display and adjustment module,
the parameter adjustment data can be saved therein. The procedure
is described in menu item "Copy device settings".
SITRANS LG260 - Operating Instructions
37