Wireless Network Settings - Grundig 40 GFT User Instructions

NETWORK­SETUP
Wireless­network
Wireless­network­connection
SERVICE
LAN
1­
Television includes a built-in Wireless WiFi
Adapter to connect it to wireless network.
Notes:
Wireless LAN adapter supports IEEE
7
802.11B/G and N communication
protocols. We recommend you to use IEEE
802.11N protocol to obtain the best perfor-
mance in wireless HD video playback.
If you use a modem that supports IEEE
7
802.11B/G, video playback performance may
be poor when compared to a modem that sup-
ports IEEE 802.11N since the data transfer rate
of IEEE 802.11B/G protocol is lower.
Please note that video playback perfor-
7
mance in a DLNA application on a wireless
local network and in a SMART inter@
ctive TV 4.0 application on a network with
internet connection depends on the number
of users on the network as it is the case in
every wireless network.
It is recommended to switch off the equip-
7
ment that are not in use in home network in
order to avoid unnecessary network traffic.
Placing the modem or wireless network
7
sharer on an elevated location will increase
the wireless connection reception strength.
Wireless connection reception strength may vary
7
depending on the type of the modem and the
distance between the modem and television.
76­ ENGLISH
­ - ------------------------------------------------------------------------------------------
Wireless­network­settings
You have several ways to connect your TV to
your home network.
A Automatic connection,
a ll data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem auto-
matically.
D epending on the router, you can use the
following options:
– O ption "WPS-PBC" (Push Button Configu-
– Connecting with a WPS PIN;
– C onnecting by entering the network pass-
B Manual connection,
a ll data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
ration);
word.