Settings For Connecting To The Home Net- Work; Tuning Channels - Grundig 40 GFT User Instructions

Table of Contents

Advertisement

INITIAL­SET-UP
The television set is fitted with an "installation as-
sistant", which guides you step by step through
the basic settings.
Using the screen dialogue, the user guide
enables supposedly complex settings and data
entries to be presented simply and clearly for
everybody.
Pages and dialogue items appear on the screen,
which identify the subsequent and likely operat-
ing steps.
To support this, you will also see the required
button symbols of the remote control.
The basic settings in detail:
– language selection
– country selection;
– choice of user mode;
– location selection;
– accessories selection;
– network settings (if desired);
– S tation settings (DVB-S, DVB-T, DVB-C and
analogue channels).
The detailed settings can be found on pages 19
and 22.
Settings­for­connecting­to­the­
home­network
Depending on the connection to the home net-
work, you connect your television to the home
network:
– via a LAN connection or
– w ithout cable via WLAN
There are two options with the LAN-connection:
Automatic­connection
a ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
Manual­connection
a ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.
­---------------------------------------------------------------------------------------------------
There are various options when using WLAN:
Automatic­connection
a ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
D epending on the router, you can use the fol-
lowing options:
– O ption "WPS-PBC" (Push Button Configura-
tion);
– Connecting with a WPS PIN;
– C onnecting by entering the network pass-
word.
Manual­connection
a ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.
Tuning­channels
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
DVB-S – Tunes digital channels from the
satellite, from page 21.
You have two options for this search:
– the basic installation which presets a stan-
dard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
– the professional installation, which allows
you to make all required settings and set
parameters for your receiver system.
DVB-C – For setting up digital cable channels
see page 21.
DVB-T – For setting up digital terrestrial
channels see page 22.
Searching for Analog television channels,
s ee "Setting further channels" section on page
92 .
Note:­
See "Setting further channels"" section start-
7
ing from page 82 for more information on
digital television channel settings.
ENGLISH
17­

Advertisement

Table of Contents
loading

This manual is also suitable for:

6820

Table of Contents