Table of Contents
Advertisement
MAINTENANCE
Carburetor Adjustment
Level 2.
When carburetor adjustment is completed, the cutting
attachment should not move at idle, otherwise serious personal
injury may result.
Engine Break-In
New engines must be operated a minimum duration of two tanks of fuel
break-in before carburetor adjustments can be made. During the break-in
period your engine performance will increase and exhaust emissions will
stabilize. Idle speed can be adjusted as required.
High Altitude Operation
This engine has been factory adjusted to maintain satisfactory starting, and
durability performance up to 335 m (1,100 ft.) above sea level (ASL)
(96.0 kPa). To maintain proper engine operation above 335 m (1,100 ft.)
ASL the carburetor may need to be adjusted by an authorized service
dealer.
If the engine is adjusted for operation above 335 m (1100 ft.) ASL, the
carburetor must be re-adjusted when operating the engine below
335 m (1100 ft.) ASL, otherwise severe engine damage may result.
Note: Every unit is run at the factory and the carburetor is set in
compliance with emission regulations. Carburetor
adjustments, other than idle speed, must be performed by an
authorized dealer.
40
SRM-3020T
X7502350103
© 05/22 ECHO Incorporated
Advertisement
Table of Contents
