Appliance Self-Test; Customer Service - Siemens KG56NHX3P Installation Instructions And Instructions For Use

Fault
The cameras do not take any
photos.
Camera lenses are misted
up.
Automatic super freezing
does not switch on.

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
1. Switch off the appliance and wait 5
minutes.
2. Switch on the appliance and within the
first 10 seconds, press and hold the
°C button and the "–" setting button
for 3–5 seconds until an audible
signal sounds.
The self-test programme starts.
When the self-test ends and an audible
signal sounds twice, your appliance is
in working order.
If 5 audible signals sound, there is an
error. Inform customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
Possible cause
The cameras are not
activated in Home Connect.
The anti-mist film is
damaged.
Remedial action
Activate the cameras.
Replace the anti-mist film.
The appliance decides independently whether
automatic Super freezing is required and
automatically switches it on or off.

Customer service

Your local customer service can be
found in the telephone directory or in the
customer service index. Please give
customer service the product number
(E-Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) of the
appliance.
This information can be found on the
rating plate.Image 0
This way you will help to prevent
unnecessary callouts and save the
associated additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0344 892 8999
IE 01450 2655
US 866 447 4363
en
Calls charged at local
or mobile rate.
0.03 € per minute at
peak. Off peak
0.0088 € per minute.
toll-free
31