Home Connect - Siemens KG56NHX3P Installation Instructions And Instructions For Use

en

Home Connect

This appliance is Wi-Fi-capable and can
be remotely controlled using a mobile
device.
Note
Wi-Fi is a registered trade mark of the Wi-
Fi Alliance.
In the following cases, the appliance
functions like a refrigerator without a
network connection and can still be
manually operated via the controls:
The appliance is not connected to a
■
home network.
Home Connect service is not available
■
in the country in which the appliance
is set up. For an overview of the
countries in which Home Connect is
available, see www.home-
connect.com.
Notes
Please observe the safety information
■
in these operating instructions and
ensure that this is still adhered to,
even if you operate the appliance via
the Home Connect app and are not at
home when doing so.
You must also follow the instructions
in the Home Connect app.
If the appliance is being operated by
■
means of the controls on the
appliance itself, this mode of
operation always has priority. During
this time, it is not possible to operate
the appliance using the Home
Connect app.
14
Home Connect setup
Notes
Observe the Home Connect
■
supplementary sheet, which is
available for download under http://
www.siemens-home.bsh-group.com
with the instructions. To do so, enter
the E-number of your appliance in the
search field.
After switching on the appliance, wait
■
at least two minutes until internal
device initialisation is complete. Only
then start setting up Home Connect.
To make settings with Home Connect,
■
the Home Connect app must be
installed on your mobile device.
Please observe the Home
Connect documents supplied for
doing this.Follow the steps specified
by the app to make the settings.
If the appliance is not operated for a
■
long time, the Home Connect menu
closes automatically. You can find
information on how to open the Home
Connect menu at the start of the
appropriate sections.
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, you can automatically connect
the refrigerator to the home network.
1. Press the super button and the
lock button simultaneously to open the
Home Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press the lock button
again until the lock is deactivated.