Installing the System Board
1.
Align the system board on the computer.
2.
Tighten the screws to secure the system board to the computer.
3.
Connect the following cables to the system board:
a. camera cable
b. display assembly cable
c. system fan cable
d. hard-drive cable
e. hard-drive/optical-drive power cable
f. power-switch cable
g. speaker cable
h. convertor cable
4.
Install:
a.
memory (optional)
b.
WLAN card
c.
heatsink
d.
system-board shield
e.
back cover
f.
optical-disk drive
g.
stand
5.
Follow the procedures in
Removing the Display Assembly
1.
Follow the procedures in
2.
Remove:
a.
stand
b.
optical-disk drive
22
After Working Inside Your
Before Working Inside Your
Computer.
Computer.