Installing the WLAN Card
1.
Insert the WLAN card into its slot.
2.
Connect the two connectors (black cable to the black triangle and white cable to the white triangle).
3.
Place the WLAN holder and tightened the screw that secures the WLAN card to the system board.
4.
Install:
a.
stand
b.
optical-disk drive
c.
back cover
d.
system-board shield
5.
Follow the procedures in
Removing the Speakers
1.
Follow the procedures in
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
d.
system-board shield
3.
Perform the following steps as shown in the illustration:
a. Disconnect the speaker cable [1].
b. Unroute the speaker cable [2].
c. Lift the speaker from the computer chassis [3].
18
After Working Inside Your
Before Working Inside Your
Computer.
Computer.