User Login Feature
This feature allows you as the user to be associated
with the radio. With this association, every data
application (Example: Text Messaging Service) takes
on a friendly username.
You can still send text messages without logging in
as a user. The user login feature only enables the
recipient of your message to identify you as the
sender by assigning a username to your message.
Note
A predefined username that is set more than
the maximum allowed characters is an invalid
name.
Logging In as a User
1 Perform one of the following actions:
•
Press the preprogrammed User Login button.
•
or to User and press the Menu Select
button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
88
English
•
or
to scroll through the list of predefined
user names. Press the Menu Select button
directly below Logn to select the predefined
username.
•
Press and hold
or
list of predefined user names at a fast scroll
rate. Press the Menu Select button directly
below Logn to select the predefined user name.
One of the following scenarios occurs:
•
If the ID is invalid, the display shows
momentary Invalid ID.
•
In ARS Server Mode, the display shows the
User Login Indicator icon, the ID, and In
progress, with Cncl.
•
In ARS Non-Server Mode, the display shows
the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
•
In non-ARS enabled mode, the display shows
Offline, with Logt and Exit.
One of the following scenarios occurs:
•
If the user name is invalid, login fails and the user
login failure indicator (IP indicator) icon blinks. The
display also shows momentary Login failed.
to scroll through the