Table of Contents
Advertisement
Charge the battery on the day before or on the day it is to be used.
Charged batteries gradually lose their charge, even when they are not used.
After charging the battery, remove it and disconnect the charger from the power
outlet.
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small amount of power
current will keep being released, resulting in excess discharge and shorter battery life.
Store the battery with the protective cover attached. Storing the battery when it is fully
charged may lower the battery performance.
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz power source.
If necessary, attach a commercially available plug adapter for the respective country or
region. Do not attach any portable voltage transformer to the battery charger. Doing so
may damage the battery charger.
If the battery becomes exhausted quickly even after having been fully charged,
the battery has reached the end of its service life.
Check the battery's recharge performance (
Caution
After disconnecting the charger's power plug, do not touch the prongs for approx. 5
sec.
The provided charger cannot charge any battery other than Battery Pack LP-E17.
) and purchase a new battery.
44
Advertisement
Table of Contents
