Table of Contents
Advertisement
12.
Take a test shot.
Press the <
Interval (2) shown on the screen.
As in still photo shooting, set the exposure and shooting functions, then
press the shutter button halfway to focus.
Press the shutter button completely to take a test shot, which is
recorded to the card as a still photo.
If there are no problems with the test shot, go to the next step.
To take more test shots, repeat this step.
Note
Test shots are captured in JPEG
Shutter speeds available in [
lapse] settings. The range is 1/4000 to 30 sec. in [Custom] mode
or otherwise 1/4000 to 1/30 sec.
You can set the maximum limit for Auto ISO in [
[
] mode with ISO Auto, in the [
[
:
If you have set [Half-press] in [
movies] to [Meter.+
[Meter.+One-Shot AF] when you set up time-lapse movie
recording.
> button and double-check the Time required (1) and
ISO speed settings] (
Servo AF], it is automatically changed to
357
quality.
] mode vary depending on [Time-
Max for Auto] option of
).
: Shutter btn function for
] mode or in
Advertisement
Table of Contents
