Fisher-Price View-Master 3-D Viewer Instructions

• Please save these instructions for future reference.
• Requires three size "AAA" (LR03) alkaline batteries
(not included).
• Adult assembly is required to install batteries.
• Tool required for battery installation: Phillips Screwdriver.
Battery Installation
CAUTION
Please keep small parts, such
as the "AAA" (LR03) batteries, out
of children's reach.
–
Shown Actual Size
• Loosen the screw in the battery compartment door with a
Phillips screwdriver.
• Remove the battery compartment door.
• Insert three new size "AAA" (LR03) alkaline batteries, as
indicated inside the battery compartment.
• Replace the battery compartment door and tighten the screw
with a Phillips screwdriver. Do not over-tighten.
1.5V x 3
+
"AAA" (LR03)
Battery
Compartment
Door
Instructions
Battery Information
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always
remove exhausted batteries from the product. Battery leakage
and corrosion can damage the product.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended
in the "Battery Installation" instructions are to be used.
• If removable rechargeable batteries are used, they are only to
be charged under adult supervision.
• Rechargeable batteries are to be removed from the product
before they are charged.
• If you use a battery charger, it should be examined regularly
for damage to the cord, plug, enclosure and other parts. Do
not use a damaged battery charger until it has been properly
repaired.
Viewer
• Insert the cartridge into the viewer, as shown.
• Slide the cartridge lock to secure the cartridge in the viewer.
You will hear a sound when the cartridge is properly inserted
and secured.
Cartridge Installation
Cartridge
Cartridge Lock