Table of Contents
Advertisement
Turning the Projector On/Off
Turning on the Projector
1
Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
2
Turn on the projector by pressing "Power" button on the control panel or
the remote control, and the Power indicator LED will turn blue.(Illustration
#1)
3
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
1
Power button
9
Advertisement
Table of Contents
