4.
Line In port (light blue). This port connects to the tape, CD, DVD player, or other
audio sources.
5.
Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1,
5.1and 7.1-channel configurations, the function of this port becomes Front Speaker
Out.
6.
Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table for the function of the audio ports in 2.1, 4.1, 5.1, or
7.1-channel configuration.
Audio 2.1, 4.1, 5.1 or 7.1-channel configuration
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
7.
USB 3.1 Gen 1 (up to 5Gbps) ports (blue, Type A). These 9-pin Universal Serial Bus
(USB) ports are for USB 3.1 Gen 1 devices.
•
USB 3.1 Gen 1 devices can only be used for data storage.
•
We strongly recommend that you connect USB 3.1 Gen 1 devices to USB 3.1 Gen 1
ports for faster and better performance from your USB 3.1 Gen 1 devices.
•
Due to the design of the Intel
USB 2.0 and USB 3.1 Gen 1 ports are controlled by the xHCI controller. Some legacy
USB devices must update their firmware for better compatibility.
8.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
9.
USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
ASUS H370 MINING MASTER
Headset
4.1-channel
2.1-channel
Line In
Rear Speaker Out
Line Out
Front Speaker Out
Mic In
Mic In
-
-
300 series chipset, all USB devices connected to the
®
5.1-channel
Rear Speaker Out
Rear Speaker Out
Front Speaker Out
Front Speaker Out
Bass/Center
-
Side Speaker Out
7.1-channel
Bass/Center
1-5