How To Operate The Oven - Sharp YB-S1282AE Original Instruction

HOW TO OPERATE THE OVEN

Introduction: Water, sugar and fat in food absorbs
microwaves and causes their molecules to vibrate.
This creates heat by friction, in the same way your
hands get warm when you rub them together.
The outer areas of food are heated by microwave
energy and the remaining portions by conduction. It
is important to turn, rearrange or stir food to ensure
even heating. Where recommended, allow food to
stand, this is not optional and is necessary to ensure
thorough cooking. It is particularly important for
dense food, such as joints of meat.
MEMORY COOKING
NOTE FOR MEMORY COOKING
• This oven has 20 memory banks (1-20) which can
store cooking programmes.
• The memory banks 1-0 have been programmed
previously as shown in the table. These
preprogrammed memory banks can be changed
individually if required.
• In addition for all memory banks a time constant
1.7 for the double quantity is stored. The stored
time constant can also be changed individually if
required.
• Information in these memory banks is not lost due
to power interruptions. If the power goes off, the
oven does not need to be reprogrammed. No
batteries are necessary for this type of memory.
• If you want to memorise or check the programme
or cook using memory 11-20, press the desired
NUMBER key twice within 1 second.
COOKING WITH MEMORY
Example: If you want to cook by using memory 1, which was programmed for 10 seconds at 100%.
Step Procedure
1
Press the NUMBER key
NOTES:
• Microwaves pass through non-metallic dishes and
utensils and heat the food inside the dishes.
• Microwaves are reflected by metal.
• The oven is lined with metal and has a fine metallic
mesh in the door to prevent microwave leakage.
• Metallic dishes are not suitable for microwaving.
Memory No.
1
2
3
4
5
6
7
8
9
0
To check the stored programmes please refer to
"Memory check" on page EN-12.
To change the stored programmes please refer to
"Memory programme entry" on page EN-9.
Key Order
.
EN-8
Cook Time Output Power
10 sec.
20 sec.
30 sec.
45 sec.
1 min.
1 min. 15 sec.
1 min. 30 sec.
2 min.
2 min. 30 sec.
3 min.
Display
After about 1 sec.
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%