Magnavox 9MDPF20 Owner's Manual page 9

TD007_9MDPF20_V3.QX33
C Hooking Up Your TV/DVD
with the supplied Rod Antenna
To install the supplied rod antenna, push the
stem of the antenna into the antenna hole at
the top on the rear of the TV/DVD. Connect
the antenna wire to the ANT(enna) Jack on the
rear of the TV/DVD as shown. Extend the
antenna and adjust its length, direction, and
angle for the clearest picture.
D Hooking Up Your TV/DVD to Another
Video Source
(VCR, DVD Player, Camcorder, etc.)
You may need this connection if you want to
play Discs or tapes on other equipment but
watch them on the TV/DVD. Press the SELECT
button on the remote to choose AUX at the
TV/DVD when viewing materials playing on
other equipment.
Audio and video cables are not supplied.
AUDIO/VIDEO OUT
Jacks on VCR
(example only)
3CH
4CH
AUDIO VIDEO
OUT
L R
IN
When all other connections are
2
complete, plug in the TV/DVD's
power cord.
3 Before you turn on the TV/DVD,
go to page 12.
04.2.18 1:51 AM Page 9
Hooking Up the TV/DVD (cont'd) 9
Connect audio cables to the
AUDIO OUT Jacks on the
VCR and to the red and
white AUDIO In Jacks on
IN
ANT. the front of the TV/DVD.
OUT
3CH
4CH
AUDIO VIDEO
OUT
L R
IN
DC 13.2V
L
AUDIO OUT
R
COAXIAL
IN
ANT.
OUT
Connect a Video cable to the
VIDEO OUT Jack on the VCR and
to the yellow VIDEO In Jack on
the front of the TV/DVD.
Rod Antenna
(supplied)
ANT.
ANT.
AUDIO/VIDEO In
Jacks on front of
TV/DVD