Cisco Firepower 4100 Manual page 14

100-Gb Network Module
Figure 9: FPR4K-NM-4X40G
1
3
5
100-Gb Network Module
Note
Overview
14
Captive screw/handle
Ethernet X/1
Ethernet X/3
Make sure you have the correct firmware package and software version installed to support this network
module. For instructions on how to verify your firmware package version and to upgrade the firmware
if necessary, see the Cisco Firepower 4100/9300 FXOS Firmware Upgrade
4100/9300 FXOS Compatibility
2 Network activity LEDs
• Off—No connection or port is not in use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
• 40Gb—Only the leftmost LED indicates the
port status.
• 4x10Gb—Each of the port LEDS indicates
the status of respective 10-Gb channel.
4 Ethernet X/2
6 Ethernet X/4
for the software compatibility matrix.
Overview
Guide. See Cisco Firepower