Features; The Timer; Setting The Clock - Magnavox 51MP392H User Manual

Using the Onscreen Submenus: Features
Y
our TV comes with an onscreen clock. You
will need to set the clock before you can use
the Timer feature. During normal operation, the
time appears on the screen when you press the
STATUS/EXIT button. You can show the time on
screen constantly by turning the TIMER DIS-
PLAY control on (see page 31).
For instructions on setting the Timer's START
and STOP times, see page 32. Then go to pages
33 and 34 to learn how to select the Timer's
channel and activate the Timer.
1
Press the MENU button on the remote
control to show the onscreen menu.
2
Press the CURSOR BUTTON DOWN
twice to highlight FEATURES.
3
Press the CURSOR BUTTON RIGHT
to enter the FEATURES submenu.
4
Press the CURSOR BUTTON RIGHT
again to shift the display left and high-
light the TIME control.
5
Press the CURSOR BUTTON RIGHT
again to highlight the time indicator area.
6
Press the NUMBER buttons to enter
the correct time. If you make a mistake
entering the time, press the CURSOR
BUTTON LEFT or RIGHT to move
among the input slots to make correc-
tions.
NOTE: You can also press the CURSOR
BUTTON UP or DOWN to cycle
through digits to input the time.
7
Press the CURSOR BUTTON UP or
DOWN to select AM or PM.
8
Press the STATUS/EXIT button to exit
the menu.
H H
ELPFUL
• For single-digit entries, be sure to press 0
first and then the hour number.
• If you'd like, set the clock automatically
using the AutoChron™ feature (page 5,
Quick Use and Setup Guide).
• Clock settings may be lost when the TV is
unplugged or when AC power to the set is
INTS
S C
ETTING THE
PICTURE TIMER
SOUND AutoLock

FEATURES

CLOSED CAP
INSTALL FORMAT
6
1
7
8
2
30
LOCK
FEATURES
TIMER
AutoLock
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIMER
3,4,
TIME
START TIME
STOP TIME
5
CHANNEL
ACTIVATE
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
_ _:_ _
8:00 PM