Turning On The Storage System; Installing And Using The Dell Storage Client - Dell Storage Center SCv2000 Getting Started Manual

Figure 10. Power Cables
3. Secure each power cable to the storage system chassis using the strain relief fasteners.
4. Plug the other end of the power cables into a grounded electrical outlet or a separate power source
such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).

Turning on the Storage System

Turn on the storage system after racking and cabling all of the Storage Center components.
Turn on the Storage Center system components in the following order:
1. Turn on the network switches (if installed).
2. Turn on the expansion enclosures (if installed).
NOTE: Before turning on the storage system, make sure that the status indicator on the front of
each expansion enclosure is blue.
3. Turn on the storage system by pressing both power switches at the same time.
Figure 11. Location of the SCv2000/SCv2020 Storage System Power Switches
NOTE: Before turning on the host servers, make sure that the status indicator on the front of
the storage system is blue.
4. Turn on the host servers that are connected to the storage system.

Installing and Using the Dell Storage Client

The Dell Storage Client configures, manages, and monitors an SCv2000/SCv2020 storage system.
1. Go to support.dell.com
2. Install the Enterprise Manager Client on a host server.
and download the Dell Enterprise Manager software.
15