Table of Contents
Advertisement
3D Solutions
3.4 Cleaning instructions
Before cleaning the display, disconnect the power cord and DVI cable.
It is preferable to clean the front of the display with the cleaning products listed in the table
below.
To clean we recommend:
cleaning materials
Aqueous solution, neutral and weakly
alkaline window cleaner without
additives of abrasive substances:
Permitted portion of ammonia < 5
Vol-%, as well as water soluble
organic solvents < 5 Vol-%.
Do not use for cleaning:
alkaline lyes
lyes
acids
decalcification agent
degreasing agent
Strong ammonia detergents
chlorine or Hypochloride detergents
solvents
coarse millinery
Other
As an alternative, clean the front of the display with a solution of soft soap (e.g. liquid hand
soap) and tepid water, using a soft cloth or sponge.
The rest of the display can be cleaned with a dry cloth.
01 April 2009
16 of 25
Display User Manual
e.g. soft cotton cloth
window leather
e.g. Flux
Ajax
e.g. durd soap, certain textile detergents
e.g. toilet cleaner
e.g. hydrochloric acid, vinegar, lemon
e.g. citric acid
e.g. acetone, methylene chloride,
trichloroethylene, petrol
e.g. Toilet cleaner
e.g. Chavel water, Domestos
e.g. Ethyl alcohol, Isopropyl alcohol,
alcohol, acetone, trichloroethylene,
benzene, hexane, petrol
e.g. abrasive, steel wool, sponge with
abrasives, blades cloth with thread
made of steel, hard cloth or paper
tissue
Electrolube ASC, REF ASC250ml
©2009 Philips Electronics Nederland B.V.
Advertisement
Table of Contents
