Table of Contents
Advertisement
Step
Screw (quantity)
1
M2 × L4.5 mm, flat-head, nylon-coated (1)
1050 Thermal fan assembly
For access, remove this FRU:
• "1010 Base cover assembly" on page 71
Removal steps of the thermal fan assembly
When installing:
• Ensure that the connector is attached firmly.
• Do not press the top of the fan cover and the fan hub.
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on
the part marked
a
as shown in the following illustrations. Either too much or too less application of grease
can cause a thermal problem due to imperfect contact with a component.
1060 Built-in battery
Important notices for replacing a battery
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out of their use.
The Lenovo Solution Center program provides an automatic battery diagnostic test that determines if the
battery is defective. A battery FRU should not be replaced unless this diagnostic test shows that the battery
is defective. The only exception to this is if the battery is physically damaged or a customer is reporting a
possible safety issue.
Color
Silver
2c
2a
2b
2d
Chapter 9
Torque
0.181 Nm
(1.85 kgf-cm)
.
Removing or replacing a FRU
75
Hide quick links:
Advertisement
Table of Contents
