Table of Contents
Advertisement
General Settings (Continued)
AV2 Connection
You can connect a decoder or other device to the
EURO AV2 DECODER socket on the back.
[Decoder] Select [Decoder] if you connect the
recorder's EURO AV2 DECODER jack to a PAY-TV
or Canal Plus decoder.
[Others] Select [Others] if you connect the
recorder's EURO AV2 DECODER jack to a VCR or
similar recording device.
Antenna feed 5V
If you are using an active antenna, you will have to
switch on the antenna feed (DC 5V/100mA). The
antenna will be supplied via the AERIAL input.
In case of overload, or if there is a short circuit in the
antenna feed, this will be switched off automatically. If
this occurs, please repair the fault, then switch on the
antenna feed again.
Initialization
You can reset the recorder to its original factory
settings and initialize the HDD.
[Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (Rating, Password, and Area
Code)
[HDD format] Initializes the HDD (Hard Disk Drive):
everything recorded on the HDD will be erased.
1. Select [Initialize] option then press B.
2. Press v / V to select the desired option then press
OK ( ).
The confirm message will appear.
3. Use b / B to select [Yes] or [No] then press
OK ( ).
Language Settings
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
[Original]Refers to the original language in which
the disc was recorded.
[Other] To select another language, press number
buttons then OK ( ) to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 62). If you enter
the wrong language code, press CLEAR/EXIT.
[Off](for Disc Subtitle) : Turn off Subtitle.
DTV Audio
Digital channels sometimes provide multiple audio
tracks, often in a different language. You can set a
default audio language with this setting.
Tips:
If provided by the broadcaster, you can also select a
different audio language while viewing TV by
pressing AUDIO repeatedly.
DTV Subtitle
Digital channels sometimes provide subtitle, often in a
different language. You can set a default subtitle
language with this setting.
Note:
DTV Subtitle will appear only if provided by the
broadcaster.
Tips:
If available, you can also select a subtitle language
while viewing digital TV viewing, press SUBTITLE
repeatedly.
If subtitles are available, the DTV subtitle icon (
appears on the program information display to
indicate that you can select one of those subtitle
options with the SUBTITLE button.
DivX Subtitle
You can select a language code for DivX subtitle.
)
21
Advertisement
Table of Contents
