Blade Changing Procedure - Bosch MGM8832 IN Series Instruction Manual

Blade changing procedure

Parts
Blade (a)
Axis (b)
Brass washer (c)
Fibre washer (d)
Plain washer (e)
Spring (f)
Coupler (g)
Removing the blade
1. Hold the coupler on the underside of the
jar and using spatula rotate the blade
nut in a clockwise direction.
remove
Blade changing procedure
2. If the coupler is removed (the blade
sticks together with the axis), washers
and spring will come off when you take
blade assembly out of the jar.
W Small parts – be careful not to lose or
forget them.
3. Take the blade assembly out of the jar.
4. Hold the blade assembly with cloth.
Using spatula untighten the blade nut
(turn in a clockwise direction).
remove
en
9