Light Replacement - U-Line 1000 Series User Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Light Replacement

To replace the light bulb in your U-Line unit:
NOTICE
ALWAYS use a genuine U-Line replacement 120V
10 watt bulb (Part Number 31317) in the light
housing. Use of any other bulb within the
housing will produce excessive heat, causing
damage to the light housing and cabinet interior,
and will compromise the precise temperature
control of the unit.
1. Find the light located at the top of the unit. Grasp the
edges of the light housing lens (1) opposite the
exposed tab and gently push the lens toward the tab
(2).
2. Pull the edge of the lens down (1) and swing it out of
the light housing.
1
3. Remove old light bulb and install new light bulb into
receptacle.
4. Replace the lens by first inserting the tab side back into
the housing at a slight angle.
5. While gently pushing the lens towards the tab end,
push the free end into the housing, and release when
you hear a snap.
2
u-line.com
Light Replacement 1