Replacement Of Fan Motor; Replacement Of Tray; Replacement Of Lamp - Samsung CM1319A/XEU Service Manual

3. Disassembly and Reassembly

3-7 Replacement of Fan Motor

Parts
Fan Motor

3-8 Replacement of Tray

Parts Explaination Photo
Assy
Stirrer
Tray

3-9 Replacement of Lamp

Parts
Assy
Stirrer Lamp Cover
Outer Panel
Explaination Photo
Ventilation Motor
Supporter-Fan-Mount
Duct-Fan
1. Open the door .
. Remove the tray by inserting a thin metal tool into the gap
between the oven wall and the tray silicon cover .
3. Insert the new tray by tilting it across the oven cavity .
4. Firstly fix the front part (refers to the place where the silicon
cover is thinner than the other 3 edges) and then place the
back ward part carefully and firmly.
NOTE : Be careful when you handle the tray since it is fragle .
Explaination Photo
Lamp Holder
1. Remove the outerpanel and back-cover .
. Discharge the high voltage capacitor .
3. Remove all the lead wires from Magnetron
and High Voltage Capacitor .
4. Remove 2 screws securing the duct fan .
5. Remove 2 screws securing the Supporter-
Fan Mount .
C-Film
6. Lift the Ventilation Motor Ass'y slightly left
upward and pull it out .
7. Remove lead wires and connectors .
8. Remove a screw securing the C-Film to
the Supporter-Fan-Mount .
9. Turn the fanmotor ass'y over soth at the
bracket side is up .
10. Remove 2 screws securing the Ventilation
Motor .
Explaination
NOTE : You donn't need to remove the outer
panel or other parts in order to replace a
lamp
1. Remove a screw securing the lamp cover .
. Remove the lamp by rotating it clockwise .
3. Replace with a new lamp by rotating it
counter-clockwise
NOTE : If it is necessary to replace the lamp
holder, you can disconnect lead wires by
pushing down on the hole of lead wires using
a long pointed tool .
11
Explaination
Explaination