Table of Contents
Advertisement
Properties and functions
1.6 Requirements for use
Note
Keep the firmware version of the CPUs and communications modules up to date
To avoid possible problems when using newer CPUs together with older communications
modules, you should keep the firmware of both your communications modules and your
CPUs up to date.
Check regularly for security updates for the firmware and use them.
Information regarding product news and new firmware versions of the communications
module is available at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15341/dl)
1.6.2
Project engineering
Software for configuration and online functions
To configure the CM, the following configuration tool is required:
STEP 7 version
STEP 7 Professional V14
STEP 7 Professional V17
STEP 7 Professional V18
Downloading the configuration data
When there is a download to the CPU, the CM is supplied with the relevant configuration
data. The configuration data can be downloaded to the CPU via a memory card or any
Ethernet/PROFINET interface of the S7-1500 station.
20
CM (6GK7542-1AX00-0XE0)
The functionality of the CM with
firmware version V2.0 can be
configured.
The full functionality of the CM
with firmware version V3.0 can be
configured.
The full functionality of the CM
with firmware version V3.0 can be
configured.
Operating Instructions, 04/2023, C79000-G8976-C355-05
CM (6GK7542-1AX10-0XE0)
The CM is configurable, but with
the functionality of the CM
(6GK7542-1AX00-0XE0) with
firmware version V2.0.
The CM is configurable, but with
the functionality of the CM
(6GK7542-1AX00-0XE0) with
firmware version V3.0.
The full functionality of the CM
with firmware version V4.0 can be
configured.
SIMATIC CM 1542-1
Advertisement
Table of Contents
