Table of Contents

Advertisement

3. Your New Microwave Oven

3-1. Checking Parts and Setting Up Your Microwave Oven
Checking Parts
Unpack your microwave oven and check to make sure
that you have all the parts shown here. If any parts is
missing or broken, call your dealer.
microwave oven
glass tray
roller guide ring
install bracket
(6-#5 Tap Screws)
instruction manual
install bracket
(left/right)
outer panel screws
(7-#4 Tap Screws)
- 9 -
Setting Up Your Microwave Oven
1
Once connected to the power supply the
display on your oven will show:
Make sure there is adequate ventilation for your
oven by leaving at least 50mm of space behind,
above, and to the side of the oven.
2
Open the oven door by pressing the
button below the control panel.
3
Wipe the inside of the oven with a damp
cloth.
4
Place the pre-assembled ring in the
indentation in the center of the oven.
Holding stick
(a device which prevents the grass trayfrom its bounce.)
5
Place the glass tray on top of the ring so
that the three glass tabs in the center of the
tray fit securely into the tabs on the floor of
the oven.
Precaution
Never operate the oven if the vehicle is
experiencing violent movement.
Operating the oven in a fast moving vehicle
is not recommended.
Ensure that the spillage is kept to a
minimum by using an appropriate container.

Advertisement

Table of Contents
loading

Table of Contents