Remove The Hinge Rubber; Remove The Hinges - Lenovo IdeaPad Gaming Chromebook Hardware Maintenance Manual

number and instructions on a sticker fixed to the front of the new LCD part. When the new
color profiles are installed successfully, a prompted window will be displayed.
Notes: When you turn on the computer and the LCD goes black, run LCD Self-Test to help you
determine whether the LCD functions normally.
To run LCD Self-Test:
1. Ensure that the computer is connected to ac power. Then, press the power button for about
seven seconds to turn off the computer.
2. Press Fn, left Ctrl, and the power button at the same time. If the computer displays five solid
colors in sequence across the entire screen, it indicates that the LCD functions normally.
3. The test lasts for about 20 seconds and then exits automatically. You also can press the power
button to exit the test.
Go to
https://support.lenovo.com/partslookup
replacement parts:
LCD panel
Removable tapes

Remove the hinge rubber

Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 32
"Remove the hinge cover" on page 33
"Remove the LCD bezel" on page 34
Step 1. Pull out the EDP cable.
Figure 37. Pull out the EDP cable
Step 2. Remove the hinge rubber.
Figure 38. Remove the hinge rubber
Go to
https://support.lenovo.com/partslookup
replacement part:
Hinge rubber

Remove the hinges

Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module" on page 32
"Remove the hinge cover" on page 33
"Remove the LCD bezel" on page 34
Step 1. Remove eight screws. Then, remove the hinges.
Figure 39. Remove eight screws and the hinges
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
35