Command Table - Behringer D Quick Start Manual

Authentic analog synthesizer with 3 vcos, ladder filter, lfo and eurorack format
Hide thumbs Also See for D:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 68
68
MODEL D
MODEL D System Exclusive Commands
Some parameters in the MODEL D synthesizer can be
changed using MIDI system exclusive (SysEx) commands.
A MIDI utility such as the popular MIDI OX can be used to
send the SysEx command data string to the MODEL D using
the USB MIDI conection between a host computer and
the MODEL D.
SysEx Data Format
The following data format is used when creating a
SysEx message (with the data beginning with F0 and
ending with F7).
F0 00 20 32 aa bb cc dd ee ff F7
The various items in this SysEx data string are
described below:
Item
Description
00 20 32
SysEx
Manufacturer
(Behringer GmbH)
aa
Reserved
bb
Device ID: 00-0xF (must match hardware
device ID), or 7F to address all devices.
Note: This is the same as the Poly Chain ID.
It is not the MIDI Channel
cc
Main parameter number (see Command
Table below)
dd
Sub parameter number (see Command
Table below)
ee
Parameter value MSB (will be zero unless the
parameter value is greater than 127)
ff
Parameter value LSB (Range is 0 to 127)
(see Command Table below)

Command Table

cc (Main) dd
ID number
Global
Setting
Description
(Sub)
00
MIDI Channel
01
Key Priority
(In poly chain mode,
note priority will be
restricted to 'LOW')
02
Multi Trigger
03
Pitch Bend
semitones
(Pitch wheel range)
Effective when pitch
bend range not
fixed. See "OC Pitch
bend mode" below
06
MIDI IN Transpose
0xA
07
MIDI Note Zero Volts 0 to 127
08
Poly Chain* see
note below
09
Device ID
(Poly Chain ID)
0A
Enable/Disable MIDI
Channel Switches
0B Modulation Curve
OC Pitch Bend Mode
OD Poly Chain Style
Restore Global
0xB
Settings
Start User Pitch
0xE
CV Calibration
Restore Default
0xF
CV Calibration
ff (Para
Default
Range)
0 to 15
0
0-LOW
0- LOW
1-HIGH
2-LAST
0-OFF
0- OFF
1-ON
(1.05 style)
2-ON
(1.06 style)
0 to 12
12
0 to 24
12
The range is
-12 to + 12,
so 12 is no
transpose
36
0-OFF, 1-ON 0- OFF
0-15
0
0- Enable
0-Enable
1- Disable
0- Soft
0- Soft
1- Med
2- Hard
0- PitchBend
0- Fixed
Range Fixed
1- PitchBend
Range
Settable
0- New Style
0- New
1- Old Style
Style

Advertisement

Table of Contents
loading

Table of Contents