APERTURE SETTING / F-STOP Control Wheel Rotate the mode dial to A. Select the aperture value (F-number) using the Control Wheel. Adjust the focus and shoot the subject. Page 4 Copyright 2020...
Press the ISO arrow on the control wheel to display the ISO screen. Select the desired ISO setting using on the Control wheel. Page 5 Copyright 2020...
FOCUS MODE Press the Menu button then select Now select the desired focus mode, by using the arrows on the control wheel, from the menu. When the lens is equipped with the Focus Mode switch, set it to AF as well. Press the shutter button halfway to check the focus.
FOCUS POINT Press the Menu button then select Now select the desired focus area, by using the arrows on the control wheel, from the menu. . - the camera determines which of the 15 AF areas are used in focusing. - the camera determines which AF point to use within the zone selected.
Page 8
FOCUS POINT (SELECTION) Control Wheel - Once "Zone" is selected, use the control wheel to move between the three zones. - Once "Flexible Spot" is selected, use the control wheel to (Flexible Spot) move between the various AF focus points. Page 8 Copyright 2020...
CONTINUOUS SHOOTING MODE Press on the Control Wheel and use the right/left arrows to select the continuous shooting mode and the desired speed. The camera records images continuously. Page 9 Copyright 2020...
SELF-TIMER MODE Press on the Control Wheel and use the right/left arrows to select the self-timer mode Using the Control Wheel arrows, select a self-time delay of 2 seconds, 5 seconds or 10 seconds. The 10-second self-timer is convenient if the photographer would like to appear in the photo.
METERING MODE Press the Menu button then select Multi segment Now selected the desired metering mode, by using Center-weighted the arrows on the control wheel, from the menu. . Spot Page 11 Copyright 2020...
EXPOSURE COMPENSATION Press the button on the Control wheel. Now select the amount of over or under exposure desired from -5.0 EV to +5.0 EV by using the left/right arrows or turning the control wheel. Monitor Viewfinder Page 12 Copyright 2020...
WHITE BALANCING Press the Menu button then select Now select your desired white balance, by using the arrows on the control wheel, from the menu. Page 13 Copyright 2020...