Check The Paper Input Module; Check The Pim Water Bottle(S); Check The Alignment Of The Pim's And The Stackers - Canon Oce VarioPrint i Series User Manual

4.5 Check the Paper Input Module

4.5.1

Check the PIM water bottle(s)

Rev 1,2,3 - Remove the top cover from the water bottle at the rear side of the Paper Input
Module. Check if the water looks clear and if algae's are visible.
Rev 4 – not applicable.
In case you find algae's or other contamination, inform local service
4.5.2 Check the alignment of the PIM's and the HCS
Rev 1,2,3,4 – Visually check of the PIM's and HCS's are still straight in front/behind the
system.
In case they are bumped into and are misaligned, inform local service.
11