Hooking Up The Tv/Dvd - Magnavox 13MDTD20 Owner's Manual

C
Hooking Up Your TV/DVD
with a Rod Antenna (not supplied)
To install a rod antenna, push the stem of the
antenna into the antenna hole at the top on the
rear of the TV/DVD. Connect the antenna
wire to the ANT(enna) Jack on the rear of the
TV/DVD as shown. Extend the antenna and
adjust its length, direction, and angle for the
clearest picture.
Fit the stem of the rod antenna into the anten-
na hole on the TV/DVD only if it fits easily. Do
not force the rod antenna to fit in the antenna
hole.
D
Hooking Up Your TV/DVD to
Another Video Source
(VCR, DVD Player, Camcorder, etc.)
You may need this connection if you want to
play Discs or tapes on other equipment but
watch them on the TV/DVD. Press the
SELECT button on the remote to choose AUX
at the TV/DVD when viewing materials playing
on other equipment.
Audio and video cables are not supplied.
AUDIO/VIDEO OUT Jacks
on VCR (example only)
3CH
IN
4CH
AUDIO VIDEO
OUT ANT.
L R
OUT
IN
2
When all other connections are
complete, plug in the TV/DVD's
power cord.
3
Before you turn on the TV/DVD,
go to page 11 to complete the
first-time setup.
Hooking Up the TV/DVD (cont'd) 9
Connect audio cables to
the AUDIO OUT Jacks on
the VCR and to the red and
white AUDIO In Jacks on
the front of the TV/DVD.
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
L R
OUT
IN
Rod Antenna
(not supplied)
ANT.
L
AUDIO OUT
R
COAXIAL
AUDIO/VIDEO In Jacks on
front of TV/DVD
Connect a Video cable to the VIDEO OUT
Jack on the VCR and to the yellow VIDEO In
Jack on the front of the TV/DVD.
ANT.