Receiving And Installation; Section 1 - Receiving; General Information And Precautions; Safety - C&D Technologies LIBERTY 1000 Series Installation And Operating Instructions Manual

6
PART 1

RECEIVING AND INSTALLATION

SECTION 1 - RECEIVING

1.1 General Information and Precautions

This battery is designed for industrial use only and is not intended for
application in vehicular starting, lighting, and ignition, and/or operation
of portable tools and appliances. Use only in accordance with
manufacturer's written instructions. Use of this product other than in
accordance with manufacturer's written instructions may produce
hazardous and unsafe operating conditions, leading to damage of
equipment and/or personal injury.

1.2 Safety

Charge only in accordance with manufacturer's operating instructions.
Do not expose to open flame or electrical arc.
Do not tamper with cell covers that prevent access to vents.
Observe all precautions shown on the inside cover of this manual.

1.3 Packing, Inspection at time of delivery

Every precaution has been taken to pack the battery for shipment to
ensure its safe arrival. As soon as you receive the battery, check the
packing material for evidence of damage in transit. If the packing
material is physically damaged or wet acid stains are present, make a
notation on the delivery receipt before you accept the shipment/
delivery.
Note: Freight Carriers generally require that the carriers'
representative inspect concealed damage within 15 days
from date of delivery to determine responsibility. The
resolution of such claims may extend up to 9 months.
Verify the number of cartons and skids against the bill of lading and
verify the components against the packing lists. Keep a copy of the
verified lists for your installation records. It is important to verify that
the accessory package is present and the component quantity is
correct. If help is required call your local C&D Technologies
Representative or C&D Technologies Customer Service at 800-543-
8630 to report any discrepancies.

1.4 Damage and shortage situations

C&D Technologies ships FOB plant (ownership passes at our dock). If
shipments are damaged or if cartons or skids are damaged or miss-
ing, a claim must be filed with the carrier. Place an immediate
order for replacement with C&D Technologies and use the replace-
ment cost as the amount of freight that damages or shortages
involved. If individual components or parts are missing, a shortage
report should be filed immediately with C&D Technologies. Mail
(express mail recommended) or fax a copy of the VERIFIED compo-