170B Product Information
-- This message appears when there is no signal input.
Solution: Make sure interface and power cables are properly connected.
3.
CHECK CABLE CONNECTION
-- This message appears when a signal cable is disconnected while computer is working.
Solution: Re-connect signal input cables.
4.
ENTERING SLEEP MODE
-- This message appears when monitor is about to enter power saving. To wake up monitor,
press any key or click on mouse.
5.
WAITING FOR AUTOMATIC ADJUSTMENT
file:///F|/180P/170B/product/product.htm (7 of 11) [2000/7/17 12:52:40 PM]