Fujitsu ASYG07KMCF Service Manual page 32

¢ Others
Exterior
5-1. Indoor unit
Part name Model name
Air Cleaning
UTR-FA16-5
Filter
External
UTY-XWZX
Connect Kit
External
UTY-XWZXZ5
Connect Kit
External Input
UTY-XCSXZ2
and Output PCB
Communication
UTY-TWRXZ2
Kit
Modbus
UTY-VMSX
Converter
KNX Convertor UTY-VKSX
Network
UTY-VTGX
Converter
Network
Converter
UTY-VTGXV
(AC power
supply)
External Switch
UTY-TERX
Controller
- (02-16) -
Summary
Air Cleaning Filter can be mounted to
the indoor unit.
Use to connect with various peripheral
devices and air conditioner PCB.
Connecting point: CN47 on Main PCB
Required when external device is
connected.
Connecting point: CN47 on Main PCB
Use to connect with external devices
and air conditioner PCB.
Optional External Connect Kit is
necessary for installation.
Connecting point: CN65 on Main PCB
Use to connect Non-polar 2-core wired
remote controller.
For connection between indoor unit
with UART interface and a Modbus
open network.
Connecting point: CN65 on Main PCB
For connection between indoor unit
with UART interface and a KNX open
network.
Connecting point: CN65 on Main PCB
This converter is required when
connecting single split system to VRF
network system.
Use the terminal for Wired Remote
Controller.
This converter is required when
connecting single split system to VRF
network system.
Use the terminal for Wired Remote
Controller.
Air conditioner switching can be
controlled by connecting other external
sensor switches.
Use the terminal for Wired Remote
Controller.
5. Optional parts