Optical Characteristics - Philips 150P3A User Manual

Product Information
• Vertical refresh rate
• Horizontal frequency
VIDEO
• Video dot rate
• Input impedance
- Video
- Sync
• Input signal levels
• Sync input signal
• Sync polarities
• Input Frequency
• Video interface
AUDIO
• Input signal level
• Headphone out signal level
• Input signal connector
• Loudspeaker
MICROPHONE
• Sensitivity
• Output impedance
• Directivity
• Frequency range

OPTICAL CHARACTERISTICS

• Contrast ratio
• Brightness
• Peak contrast angle
file:///D|/03771/english/150p3ac/product/product.htm (2 of 9) [9/13/2002 1:39:17 PM]
56Hz-76Hz
30kHz-61kHz
80 MHz
75 ohm
5K6 ohm
700m Vpp
Separate sync
Composite sync
Sync on Green
Positive and negative
XGA Hsync
SVGA Hsync
VGA Hsync
Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are
available. It can be switching via OSD selection.
0.7 Vpp
32 Ohm 20+20mW
3.5mm mini jack
4W Stereo Audio (2W/channel RMS x2, 200 Hz -12 kHz, 8 ohm,
THD=10%)
-55dB re 1V/ubar at 1kHz
2.2K Ohm max.
-5dB at 180°
300Hz-3kHz
400 (typ.)
2
250 cd/m (typ.)
6 o'clock
48- 61 kHz, Vsync 60 - 76 Hz (N.I.)
35- 50 kHz, Vsync 56 - 75 Hz (N.I.)
31- 38 kHz, Vsync 60 - 76 Hz (N.I.)