Philips 150P3A User Manual page 59

Connecting to Your PC
4) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Connect the audio and microphone cables to the audio and mic connectors on
the back of your computer.
(d) Plug the power cord of your computer and your monitor into a nearby outlet.
(e) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
file:///D|/03771/english/150p3ac/install/connect.htm (3 of 4) [9/13/2002 1:40:01 PM]
Note: If you use an Apple Macintosh, you need to
connect the special Mac adapter to one end of the
monitor signal cable