Lenovo ThinkSystem SR645 Maintenance Manual page 272

Hide thumbs Also See for ThinkSystem SR645:
Table of Contents

Advertisement

Figure 129. Disassembling the system board
Step 1.
Remove the following screws as illustrated:
• 12 slotted screws (with PH2 screwdriver)
• Two guiding pin standoffs (with 7 mm wrench)
• One plunger (with 11 mm and 16 mm wrench)
• Eight T20 screws on the CPU sockets (with T20 screwdriver)
• Two hexagon bolts on the VGA connector (with 5 mm wrench)
Step 2.
Separate the components
After disassembling the system board, comply with local regulations when recycling.
ThinkSystem SR645 Maintenance Manual
262
from the system board.
1 2 3 4 5 6 7

Advertisement

Table of Contents
loading

Table of Contents