Lenovo ThinkSystem SR645 Maintenance Manual page 209
Hide thumbs
Also See for ThinkSystem SR645:
- Setup manual (188 pages) ,
- System manual (50 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
Figure 93. Heat sink installation
Step 1.
Orient the heat sink with the screw holes on the processor plate. The captive screws on the heat
sink should align with the screw holes on the processor plate.
Step 2.
Tighten all the captive screws in the installation sequence shown on the heat-sink label.
After you finish
1. Install the air baffle. See Install the air baffle.
2. Install any parts that you have removed.
3. Complete the parts replacement. See Complete the parts replacement.
.
Chapter 4
Hardware replacement procedures
199
Advertisement
Chapters
Table of Contents
