Audi A4 2015 Workshop Manual page 36

Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
1.8.3 Removing and installing manual release
cable for parking lock (rear) - Q5
Removing
WARNING
Accident risk; vehicle can start rolling.
♦ Pull up parking brake button to apply electromechanical
parking brake.
– Remove driver's seat ⇒ General body repairs, interior; Rep.
gr. 72 ; Front seats; Removing and installing front seat .
– Remove footwell cover (driver side) ⇒ General body repairs,
interior; Rep. gr. 68 ; Storage compartments/covers/trim pan‐
els; Removing and installing dash panel cover (driver side) .
– Remove foot rest ⇒ General body repairs, interior; Rep. gr.
70 ; Passenger compartment trim panels; Removing and in‐
stalling foot rest .
– Remove sill panel trim (driver side) ⇒ General body repairs,
interior; Rep. gr. 70 ; Passenger compartment trim panels;
Removing and installing sill panel trim .
– Remove centre console ⇒ General body repairs, interior; Rep.
gr. 68 ; Centre console; Removing and installing centre con‐
sole .
– Remove insulation.
– Release catches -arrows A- and move sleeve -1- on manual
release cable in direction of -arrow B-.
– Disengage manual release cable (rear) from manual release
cable (front) -arrow C-.
– Push floor covering in driver's footwell to one side.
32
Rep. gr.34 - Controls, housing