NatureWater 50801 Operation Manual

3-stage reverse osmosis system with water filter

Download this manual

Operation Manual

3-stage Reverse Osmosis System with Water Filter

50801

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

Page 1 Operation Manual 3-stage Reverse Osmosis System with Water Filter 50801 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.naturewater.eu Item 50801 Page 2 08 2022-1...
Page 3 RED (“To Water inlet”): coupling to water connection (inlet) Back-flushing The pre-installed ball valve must be closed during normal filter operation. To rinse the RO-membrane, the ball valve must be opened so that the water pressure can rinse the membrane. https://www.naturewater.eu Item 50801 Page 3 08 2022-1...
Page 4 If the unit has not been used for a long time, the cartridges and membrane need to be replaced. Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.naturewater.eu Item 50801 Page 4 08 2022-1...