Advertisement
Quick Links
Operation Manual
Water Purifier NW-1000
63452
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for NatureWater NW-1000
Summary of Contents for NatureWater NW-1000
- Page 1 Operation Manual Water Purifier NW-1000 63452 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.naturewater.eu Item 63452 Page 2 08 2022-1...
- Page 3 If the unit is not used for more than 3 days, bacteria can form. Flush the system for at least 5 min before using the unit again as usual. • Do not use the unit without sufficient disinfection if the water is microbiologically contaminated or of unknown quality. https://www.naturewater.eu Item 63452 Page 3 08 2022-1...
- Page 4 If the raw water does not meet the standard of municipal tap water (including excessive sludge content and TDS), the life of the filter element may be shortened. Technical Data Item model NW-1000 Power supply 220 V / 50 Hz Rated power (W)
- Page 5 Main components № Name № Name Water tank cover Control panel Water tank Effluent nozzle Housing Drip tray https://www.naturewater.eu Item 63452 Page 5 08 2022-1...
- Page 6 First press the water quantity button, then press directly on the low temperature zone to obtain water. In the high temperature zone, press the unlock button first, then the high temperature zone to get water. Press the release button for hot water https://www.naturewater.eu Item 63452 Page 6 08 2022-1...
- Page 7 If no water draw-off button is pressed within 1 hour after the last water production, the machine will automatically go into sleep mode to save power. When any water-temperature button is touched, the machine is activated and then goes into standby mode. https://www.naturewater.eu Item 63452 Page 7...
- Page 8 2. Press and hold “Reset,” then select “Reset” to select the appropriate filter element. Press and hold the “Reset” button for another 3 s to complete the reset. Note! The original filter element must be used for replacement to ensure the safety of the drinking water. https://www.naturewater.eu Item 63452 Page 8 08 2022-1...
-
Page 9: Troubleshooting Table
90 min and the water has not been refilled. The malfunction indicator lights up, showing “E1.” Use water with a tem- If the inlet water temperature is between 0–1 ℃, the perature of 4–38 ℃. error indicator lights up, showing “E5.” https://www.naturewater.eu Item 63452 Page 9 08 2022-1... - Page 10 Königsbenden 12 / 28 D-52249 Eschweiler Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.naturewater.eu Item 63452 Page 10 08 2022-1...