Panasonic DVD-LV60 Service Manual page 27

3. Remove the spring that locks the main shaft.
4. Slide the main shaft in the direction indicated by the arrow, and
remove the optical pickup unit.
9.6.4. Installing the optical pickup unit
The optical pickup unit is an adjusted and finished product. Never touch the adjusting screw.
1. Reassemble the optical pickup unit carefully in the reverse order
of the disassembling procedure.
2. Install the reassembled pickup unit and remove the solder from
the flexible cable. After that, install the traverse unit on the body.
Cautions:
- The laser diode won't emit light unless the solder has completely
been removed.
- After replacing the optical pickup unit, check the playback picture
quality and adjust the optics.
9.7. LCD Unit
<Caution>
Use caution not to get an electric shock from the high voltage
section during the electricity conducting test after disassembly.
In addition, use caution not to damage the LCD surface.
9.7.1. Disassembly procedure
1. Remove the screws from the bottom of the body.
27