Page 1
Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración 43UN672M0UB Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. 50UN672M0UB FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter...
Page 2
ENGLISH Read Safety and Reference. WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. FRANÇAIS Lisez Sécurité...
Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •...
Warning! Safety instructions - Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. - Do not install in excessively dusty places. Otherwise, this may result in fire, electric shock, CAUTION combustion/ explosion, malfunction or product deformation.
Page 14
• Use only an authorized attachments / accessories - TV with a three-prong grounded AC plug must be approved by LG Electronics. Otherwise, this may connected to a three-prong grounded AC outlet. result in fire, electric shock, malfunction, or product Ensure that you connect the earth ground wire to damage.
Preparing • Batteries - Store the accessories (battery, etc.) in a safe location out of the reach of children. • When the TV is turned on for the first time after - Do not short circuit, disassemble, or allow the being shipped from the factory, initialization of the batteries to overheat.
• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area. 43UN672M0UB Model 55UN672M0UB 50UN672M0UB VESA (A x B)
Using the Kensington Security • Use at least two people to move a large TV. • When transporting the TV by hand, hold the TV as System (optional) shown in the following illustration. (Depending upon model) The Kensington security system connector is located at the rear of the TV.
Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall (Depending upon model)
Connections • For more information of screws and wall mount bracket, refer to the Separate purchase. You can connect various external devices to the TV. • If you intend to mount the product to a wall, For more information on external device’s connection, attach VESA standard mounting interface refer to the manual provided with each device.
Other connections External Devices Supported external devices are: Blu-ray player, HD (Depending upon model) receivers, DVD players, VCRs, audio systems, USB * Remote control is not provided. storage devices, PC, gaming devices, and other external devices. Connect your TV to external devices. For the best •...
Network setup Pillow Speaker Connect the pillow speaker (see example below) (Depending upon model) to the PILLOW SPEAKER interface on the rear jack panel of the TV. Wired network connection This TV can be connected to a Pro:Centric server via the port.
The software may be updated for improvement in button. performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics.
Page 23
• Abnormal Display • When cleaning the product, be careful not - If the TV feels cold to the touch, there may be a to allow any liquid or foreign objects to small flicker when it is turned on. This is normal; enter the gap between the upper, left or there is nothing wrong with TV.
Settings Adjusting the Brightness of a Picture (All Settings) [Picture] [Advanced Settings] (Depending upon Model) [Brightness] * Remote control is not provided. Adjust the brightness of the entire screen. • [Panel Brightness] Controls the level of screen Selecting Picture Mode brightness by adjusting the backlight.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). Broadcasting Specifications Television system ATSC, NTSC-M, 64 &...
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical • Use HDMI IN 1 for PC mode. (Depending upon Resolution Frequency Frequency model) (kHz) (Hz) 31.46 59.94 Horizontal Vertical 640 x 480p 31.50 60.00 Resolution Frequency Frequency (kHz)
• ULTRA HD Video: 3840 x 2160, 4096 x 2160 Extension Codec • Some HEVC encoded ULTRA HD videos other than the content officially provided by LG Electronics VC-1 Advanced Profile may not be played. Video (except for WMVA), VC-1 .asf...
External Control Device Phone jack Type Setup (Depending upon model) (PC) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. RS-232C Setup * For other models, connect to the USB port. * The connection interface may differ from your TV.
RS-232C Configurations Communication Parameters • Baud rate: 9,600 bps (UART) 7-Wire Configurations • Data length: 8 bits (Standard RS-232C cable) • Parity: None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable. Set ID For Set ID number, see “Real data mapping”.
Command Reference List (Depending upon model) Data Command1 Command2 (Hexadecimal) 1 Power 00 to 01 2 Aspect Ratio (page 24) 3 Screen Mute (page 25) 4 Volume Mute 00 to 01 5 Volume Control 00 to 64 6 Contrast 00 to 64 7 Brightness 00 to 64 8 Color...
Transmission / Receiving Protocol 1 Power (Command: k a) ► To control Power On/Off of the set. (Depending upon Model) Transmission Transmission (k)(a)( )(Set ID)( )(Data)(Cr) Data 00: Off (Command1)(Command2)( )(Set ID)( )(Data)(Cr) Data 01: On (Command1): First command to control the TV. (j, k, m or x) (Command2): Second command to control the TV.
Page 33
3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ► To select screen mute on/off. ► To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission (k)(d)( )(Set ID)( )(Data)(Cr) (k)(g)( )(Set ID)( )(Data)(Cr) Data 00: Screen mute off (Picture on) / Video mute off Data Min: 00 to Max: 64 Data 01: Screen mute on (Picture off)
Page 34
9 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ► To adjust the screen tint. ► To lock the front panel controls on the monitor and remote control. You can also adjust tint in the picture settings. Transmission Transmission (k)(m)( )(Set ID)( )(Data)(Cr)
Page 35
15 Energy Saving (Command: j q) 17 Equalizer (Command: j v) ► To reduce the power consumption of the TV. You ► To adjust equalizer. can also adjust Energy Saving in picture settings. Transmission Transmission (j)(v)( )(Set ID)( )(Data)(Cr) (j)(q)( )(Set ID)( )(Data)(Cr) Power Saving Level Function...
Page 36
18 Tune Command (Command: m a) 19 Channel Skip / Add (Command: m b) ► Select channel to following physical number. ► To set skip status for the current Channel. Transmission Transmission (m)(a)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)(Cr) (m)(b)( )(Set ID)( )(Data)(Cr) Data 00: High channel data Data 00: Skip...
Page 37
22 Input select (Command: x b) (Main Picture Input) 23 Channel block/unblock (Command: m d) ► To select input source for main picture. ► This command may work differently depending upon model and signal. Transmission (x)(b)( )(Set ID)( )(Data)(Cr) (For South Korea, North/Latin America except Data Structure Colombia Model) Transmission...
Page 38
24 Fail Over Mode (Command: m i) (For all other regions including Colombia, Excluding the above countries) ► Selects the Fail Over mode. Transmission Transmission (m)(d)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02) (m)(i)( )(Set ID)( )(Data)(Cr) (Data 03)(Data 04)(Cr) Data 00: Off (Data 00): Physical Channel Number Data 01: Auto...
Page 39
26 Internal storage media contents play * Real data mapping (Command: s n, a8) Step 0 ► Plays media stored in the internal memory. ► This command may work differently depending Step 10 (Set ID 10) upon model and signal. Transmission Step 15 (Set ID 15) (s)(n)( )(Set ID)( )(a)(8)( )(Data)(Cr)
If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
Page 42
Regulatory FCC Radio Frequency Interference Requirements (for UNII devices) (For USA) FCC Notice High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. (For USA) These radar stations can cause interference with and/ This equipment has been tested and found to or damage this device.
Page 43
Industry Canada Statement RSS-247 Requirement (For Canada) (For Canada) [For having wireless function (WLAN, Bluetooth,...)] [For product having the wireless function using 5 GHz frequency bands] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and (1) The device for operation in the band 5150–5250 Economic Development Canada’s licence-exempt MHz is only for indoor use to reduce the potential for RSS(s).
Page 44
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: LG Take-back & Recycling Policy – ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
Page 47
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Page 48
Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com LG Customer Information Center The model and serial number of the product are located on the back and on one side of the product.